Service Doors

Professional Service Door Installation and Repair for Commercial Facilities in Sacramento, CA

R&S Overhead Doors and Gates of Sacramento, INC. installs and services a full range of rolling service doors for commercial and industrial facilities throughout Sacramento and Northern California. From standard duty and heavy duty models to insulated and climate-controlled options, our IDEA-certified technicians help you select the right door for your facility’s demands and install it to perform reliably under daily commercial use. Whether you need a new installation, a repair, or a replacement, our team delivers dependable results backed by 40+ years of experience.

Service Door Models

Standard Duty

The R&S Standard Duty door is an economical yet reliable service door.

Heavy Duty

The R&S Heavy Service Duty door provides high security and durability offering years of maintenance free performance.

Climate Guard

Climate control is provided by the combination of a flat slat curtain, hood baffle, guide weatherstripping and astragal.

Thermal Guard

An effective thermal barrier is created by the combination of 22 gage (min.) steel flat faced slats, 3/4” polyurethane foam, and 24 gage steel back slats.

Type 30 Slat

Standard curved slat for use on all service doors where strength and durability are a consideration. Available in 24, 22, 20, or 18 gage galvanized steel. Also for use on all fire doors.

Type 25 Slat

Standard flat slat for use on all service doors where environmental conditions are a consideration. Available in 24, 22, 20 or 18 gage galvanized steel. Also for use on all fire doors, especially those requiring gasketing.

Type 20 Slat

Optional curved slat for use on Service doors to 16’ wide. Available in 22 or 20 gage galvanized steel. Also for use in fire doors to 15’ wide.

Type 17 Slat

Optional flat slat for use on service doors to 16’ wide. Available in 22 or 20
gage galvanized steel or 22 gage stainless steel. Also optional on fire doors to 15’ wide. Standard on counter fire doors and counter doors.

Specifications

Windload

SD,D,W,I – Service doors are designed to withstand a minimum 20 PSF
windload.

Warranty

SD – One year or 12,500 cycles.
D,W,I – Two years or 20,000 cycles

Operation

SD,D,W,I – Chain hoist is standard; push-up (small sizes), awning crank,
crank box or motor operation are optional.

Curtain

SD,D,W,I – Galvanized steel slats with baked on gray polyester primer
standard. Tan or uncoated galvanized finish available upon request.
SD – 24 gage slats with stamped steel endlocks.
D,W – 22,20,18 gage slats, as required to meet windload, with stamped
steel endlocks. Windlocks are riveted to slats when required to meet
windload.
I – Same construction as D and W models with the addition of ¾” laid in
place polyurethane or polystyrene foam concealed by 24 gage backslat

Bottom Bar

SD,D,W,I – Extruded aluminum footpiece with astragal standard up to 16’
wide
D,W,I – Double steel angle footpiece with astragal standard over 16’.
Painted with rust inhibiting black primer.

Guides

SD – Steel channels bolted to structural steel wall angles. Painted with rust
inhibiting black primer.
D,W,I – Structural steel angles bolted to structural steel wall angles.
Windlock bars are installed when windlocks are required to meet windload.
Painted with rust inhibiting black primer.
W,I – Climate and Thermal-Guard models also include vinyl guide
weatherstripping against the flat-faced side of the slats.

Brackets

SD,D,W,I – Steel plate brackets are bolted to wall angles to support curtain
and barrel, and provide mounting for hood. Painted with rust inhibiting
black primer.

Barrel

SD,D,W,I – minimum 6” diameter steel pipe houses torsion spring assembly
and supports curtain. Torsion springs are mounted on a continuous cold
rolled steel shaft, adjustable by a tension wheel on the outside of bracket.

Hood

SD,D,W,I – Formed 24 gage galvanized steel sheet, with baked on gray
polyester primer reinforced with top and bottom flanges to limit deflection.
Intermediate support is provided when required.
W,I – Internal rubber baffle hangs against curtain to reduce air infiltration

Locking

• SD,D,W,I – Chain lock with chain operation and slidebolt locks with push-up
or crank operation standard.

Options

Increased Windload Capacity:

Curtain designs to withstand windloads exceeding 20 PSF.

High Cycle Construction:

Designs to provide up to 150,000 operating cycles or maximum possible design.

Perforated Slats:

3/64” diameter holes on 5/64” staggered centers in type 25 slats provide
30% open area for ventilation and visibility throughout the curtain.

Vision Lites:

Single or multiple 3” wide cut-outs, open for ventilation or covered with
acrylic.

Powder Coat Finish:

Powder Coating available on all exposed surfaces.

Galvanized Finish:

Hot dip Galvanizing available on footpiece, guides and brackets.

Intermediate Grille:

Partial grille curtain connecting slats above and below.

Sloped Footpiece:

For door openings on a slope.

Cylinder Locks:

Key or finger-throw cylinder installed on footpiece for easy secure locking.

Pass Door:

3’-0” x 7’-0” x 1-3/4” thick hollow metal gray primed (black optional) door in
a steel frame for access through the curtain when closed; frame is hinged to
guide and swings clear to allow use of entire door opening when curtain is
raised.